RP Lab Map Editor Pro Features · Read and program the calibration portion (maps) of ECU is matter of mouse click. Typically it takes 7 seconds to download or upload the maps from/to the ECU. No need to burn chips, or even open the ECU, it is all done via serial communication channel. · Edit maps either offline or on fly using Live edit technology, with a pointer showing which cells of fuel and ignition maps are being currently used and how close is the particular cell matched. · All the maps and most calibration constants are expressed by their real world value. · Wide range of vehicles supported, upon interest the library can be extended. To mention some of the vehicles: Ford Cosworth with level 8 Weber ECU, Lancia Delta Integrale, Lancia Dedra, Fiat Tipo / Tempra, Fiat Croma etc. · Full access to calibration portion means this is also an ideal tool when injection system is being custom installed. · Program all Map Editor compatible ECUs. · Password protected maps for increased security. Only if the correct password has been supplied, the ECU could be read or written. · Map files encrypted, only the user that saved the maps could open them. · Map comments of up to 16 characters stored in the ECU, extended description saved on hard drive. · Support for distributorless ignition system enabled ECUs. · One auxiliary ECU output (e.g. water injection, radiator fan etc) can be controlled. · IAW Monitor software included – watch, scope, log the engine parameters using embedded diagnostic interface over serial link. · Error codes retrieval and actuators (fuel pump, injectors, coils, boost control valve etc) diagnostics. · Virtual analog dashboard showing the most important engine parameters. · Adjustable closed loop fueling using narrow band lambda sensor, or simulated narrow band lambda output on wideband equipment. It will also be able to support ALS and 8-injectors at a later date (once RP Labs have got back some of their development costs to enable further investment). Email for more information and costs.