INPUTS: ECU (parallel connection): - TPS (Throttle Position Sensor); - MAP (Manifold Absolute Pressure); - ACT (Air Inlet Temperature); - ECT (Engine Coolant Temperature); - Vbat (battery voltage); - RPM(Ignition Module for engine speed); External: - Oil temperature (VDO sensor); - EGT (Exhaust Gas Temperature) - K type thermocouple; - Oil pressure (VDO sensor); - AFR (Air Fuel Ratio) - Able to display this brand (AEM, PLX, TechEdge); All these sensors are recorded in a memory (if this is opted for) and the sample rate can be user specified at either every 100ms or every 300ms (obviously the datalogging capacity is reduced if the high sample rate is used), and exportable to a computer through USB (USB connector on the front panel). Note : The VDO sensors, the type K thermocouple and the wideband AFR aren't provided. OUTPUTS: - Relay for water injection (or other) user programmable ACT (the boost trigger point is set at 0.7 bar, only the ACT trigger is adjustable); - USB (for data backups); - LED Alarms for all sensors (user selectable); - Shiftlight. As for AFR, you must purchase an extra box AEM, PLX or TechEdge. We can provide only the display of the value and the datalogging. For the screen, a green OLED of 256 x 64 px was chosen. The size is : 146mm x 65mm. Options - Datalogging capacity (depends on eeprom size) : 1 Mbytes (23min) £40 extra 2 Mbytes (46min) £60 extra 4 Mbytes (92min) £80 extra - Buzzer for alarms : 90 dB @30cm £15 extra. - Plate big (clock and doors/lamps informations location) or small (DIN radio location) £POA. DELIVERY IS EXTRA. See here for video: http://www.youtube.com/watch?v=Zo8FvmOQ6NA